First Monitor Calibration - Digi Darkroom

Below is the results of a monitor calibration performed on an Eizo SX2462W monitor on workstation 4 in the digital darkroom. The calibration was carried out using an X-Rite i1Display Pro calibration device and ?i1Profiler software.

http://www.eizo.com/global//products/flexscan/sx2462w/product_photo_02.png

http://www.borge.com.au/images/X-Rite%20i1%20Display%20Pro.png

Setting	Target Value	Achieved Value
Display	Wide Gamut CC	NA
White Point	D6500K	6577K
Luminance	120	116
Contrast Ratio	Native	673:1
Flare Correct	Off	NA
Ambient Light Control	Off	NA

As can be seen in the table above the white point was closely matched to the target value of 6500K but the luminance was slightly lower. Overall the display is achieving a very close output to the requested industry standard.